Buying Water Resistant Tile Backer Board Becomes More Easy Now

Tiles are usually meant to embellish the specific areas in the home or rooms, and getting in-depth information while buying the Tile Backer Board is becomes very important now a days. Choosing and installing the high quality Tile Backer Board can enhance your home durability and also will eliminate water stains, mold and mildew. At RockMax, we brings you some of the most demanded Tile Backer Board and other magnesium oxide cement boards products that best fit your requirement and budget!

RockMax tile backer board is magnesium cement based product, it is water resistant and its max water absorbtion rate less than 15%, the weight of our panel is only 50% of alternative sheathing material, we specialized design an rough side to receive cement mortar, and the panel with insulation properties can also boast fire which can applicable for use as wall and underlayment.  This high quality and water resistant Tile Backer Board offered by RockMax comes with various sizes including 6mm x 1220 x 2440, 9mm x 1220 x 2440, 12mm x 1220 x 2440, 6mm x 600 x 1200 9mm x 600 x 1200 and 12mm x 600 x 1200

While buying the Tile Backer Board from RockMax, you need to review the important features of this high quality Tile Backer Board from every aspect.  Have a look at this Tile Backer Board Superior Performance here:

 Fireproof:  RockMax backer board is grade A1 incombustible material with non-inflammable surface.

Waterproof: RockMax tile backer board water absorption rate <15%, the dimension is stable during wet and dry.

Moldproof: RockMax tile backer board does not condensed water and go mouldy in humid environment.

Light Weight: The weight of tile backer board is 1/6 of bricks, 50% lighter than alternative sheathing material.

Green & Healthy: All the selected raw material it is green, which does not contain asbestos and formaldehyde.

Rough Surface: Double-faced, an rough surface and an smooth surface

Place To Use:

The panel is design for use as underlayment, we try to strike a perfect balance between light weight and strength, also give consideration of waterproof and fireproof, that it became very competitive underlayment for flooring, tile, marble, aluminum composite panel, curtain wall etc.

Installation Process:

Checkout the RockMax tile backer board step by step and easy installation process that give you optimum information.  The wall of install RockMax backer board is the same as drywall screw the panel on the keel and make the wall as flat as possible. After that, snap a grid with plaster, fiberglass tape and paste on tiles.  RockMax backer board is essentially a thin layer of concrete with fibreglass mesh on both sides. It was designed specifically as a setting surface for tile. Backer board comes in a range of sizes: 600mm by 1200mm sheets are most common for floors. Over a 15mm subfloor, use 12mm-thick sheets.  1. Snap a Grid of Chalk Lines, 2. Place Backer board on Adhesive, 3. Drive in Backer board Screws, 4. Fill the Joints with Adhesive, 5.Cover Joints with 2" Fibreglass Tape.

We recommend you to explore ever demanded Geryspan Magnesium Oxide Cement Board and RockMax Mgo Subfloor Board that will best fit your requirements from every angle.  Visit our website http://www.rockmaxpan.com/ or Call us at +86-512-36904020 for more details.

Categories: