Tiles
are usually meant to embellish the specific areas in the home or rooms, and
getting in-depth information while buying the Tile Backer Board is becomes very
important now a days. Choosing and installing the high quality Tile Backer
Board can enhance your home durability and also will eliminate water stains, mold and
mildew. At
RockMax, we brings you some of the most demanded Tile Backer Board and other magnesium
oxide cement boards products that best fit your requirement and budget!
RockMax
tile backer board is magnesium cement based product, it is water resistant and
its max water absorbtion rate less than 15%, the weight of our panel is only
50% of alternative sheathing material, we specialized design an rough side to
receive cement mortar, and the panel with insulation properties can also boast
fire which can applicable for use as wall and underlayment. This high quality and water resistant Tile
Backer Board offered by RockMax comes with various sizes including 6mm x 1220 x
2440, 9mm x 1220 x 2440, 12mm x 1220 x 2440, 6mm x 600 x 1200 9mm x 600 x 1200
and 12mm x 600 x 1200
While
buying the Tile Backer Board from RockMax, you need to review the important
features of this high quality Tile Backer Board from every aspect. Have a look at this Tile Backer Board Superior
Performance here:
Fireproof: RockMax backer board is grade A1
incombustible material with non-inflammable surface.
Waterproof: RockMax
tile backer board water absorption rate <15%, the dimension is stable during
wet and dry.
Moldproof: RockMax
tile backer board does not condensed water and go mouldy in humid environment.
Light Weight: The
weight of tile backer board is 1/6 of bricks, 50% lighter than alternative
sheathing material.
Green & Healthy:
All the selected raw material it is green, which does not contain asbestos and
formaldehyde.
Rough Surface: Double-faced,
an rough surface and an smooth surface
Place To Use:
The
panel is design for use as underlayment, we try to strike a perfect balance
between light weight and strength, also give consideration of waterproof and
fireproof, that it became very competitive underlayment for flooring, tile,
marble, aluminum composite panel, curtain wall etc.
Installation Process:
Checkout
the RockMax tile backer board step by step and easy installation process that
give you optimum information. The wall
of install RockMax backer board is the same as drywall screw the panel on the
keel and make the wall as flat as possible. After that, snap a grid with
plaster, fiberglass tape and paste on tiles.
RockMax backer board is essentially a thin layer of concrete with
fibreglass mesh on both sides. It was designed specifically as a setting
surface for tile. Backer board comes in a range of sizes: 600mm by 1200mm
sheets are most common for floors. Over a 15mm subfloor, use 12mm-thick
sheets. 1. Snap a Grid of Chalk Lines,
2. Place Backer board on Adhesive, 3. Drive in Backer board Screws, 4. Fill the
Joints with Adhesive, 5.Cover Joints with 2" Fibreglass Tape.
We
recommend you to explore ever demanded Geryspan Magnesium Oxide Cement Board and
RockMax Mgo Subfloor Board that will best fit your requirements from every
angle. Visit our website http://www.rockmaxpan.com/ or
Call us at +86-512-36904020 for more
details.
Thank you for sharing this interesting and informative article, painting with airless spray gun will be faster and more interesting!
ReplyDeleteRegards,
paint sprayers